Sadly now that the kids are out of school I don’t get as much time to work on the conversion.
I have been doing things like greasing all the zerks I can find, also built some run-up ramps to get under the bus.
Spent about 4 days trying to make a path through the bottom of the bus to run the lines for the mini split but ultimately failed. Ended up just running them down the side of the master bedroom, I’ll just use some of the old stainless return ducts to cover them up.
Rest of the cabinets came in, now to get them levelled and mounted. Also, have to find some countertop.
Progress has been slow now the kids are out of school, but still plugging along.
Water supply lines are all done and pressure tested.
Originally I was going to build my own cabinets but Lowes had a great sale for Memorial Day so was able to pick up the cabinets for cheap.
First one in place to check fitment.
Ran the 6AWG wiring down to the bay where the power cable will enter. Even though I’m only planning on using 30A with this bus I ran 6 AWG so I could upgrade to 50 in the future if needed.
Has been a great past few days working on the bus.
Built and installed the pump platform.
Installed the water heater bracket.
Mounted the expansion tank and started mocking up and soldering the plumbing.